flow dividers applications, flow dividers, hydraulic flow dividers, hydraulic flow divider valve, gear flow divider, rotary flow dividers
 

Company

|

Headquarters

|

Contact

|

Home

|

 

 

 
 
 
 
 
 
HYDRAULIC COMPONENTS
 
 
    Hydraulic Winches
    Hydraulic accumulators
    hydraulic power units
    Hydraulic cylinders
    Flow dividers
    Directional control valves
    Hydraulic filters
    Joints and lanterns
    Hydraulic seals
    Hydraulic systems
    Hydraulic engines
    Hydraulic pressure gauges
    Hydraulic pumps
    Power take offs
    Hydraulic fittings
    Heat exchangers
    Power transmissions
    High pressure hydraulic hoses
    Hydraulic valves
    Pulling Winches
 
 

» Home » Flow dividers

 
Flow dividers
 
D&D Ricambi Srl: the leader on supply of hydraulic components and systems
hydraulic components for construction, earthmoving, agricultural and industrial machinery
 
 

Flow dividers
D&D Ricambi Srl offers a full range of  gear flow dividers made of aluminum alloy with high strength.

Can be used as flow equalizers, flow dividers and pressure intensifiers.
Also can be used as pressure intensifiers and flow equalizers.

The flow dividers assembling includes a gear housings and inlet sections from extruded in aluminium alloy and covers made in cast iron material. Thanks to this construction the flow dividers can be used in heavy working conditions and allow the transmission of high hydraulic powers. Also they offer very good mechanical and volumetric efficiencies, a low noise level and limited weight. The flow dividers can be used as flow equilizators (with same displacement on each section) or as flow dividers (with different sections displacement). The flow dividers can be supplied with reset valves to correct any small mistake between two or more cylinders cycle.

GEAR FLOW DIVIDERS


Gear flow dividers made of high resistance aluminium alloy.
These components can be used as flow equalizers, flow dividers and pressure intensifiers.
Displacements from 0.13 in³/rev (2,14 cm³/rev) to 2.01 in³/rev (33,03 cm³/rev) available in groups 10 and 20
Max. peak pressure up to 4060 psi (280 bar)

Modular design
Accurate division of flow
Built-in relief valves
Combinations between different groups

GEAR FLOW DIVIDERS MADE OF CAST IRON

These components can be used as flow equalizers, flow dividers and pressure intensifiers.
Displacements from 1.05 in³/rev (17,28 cm³/rev) to 7.66 in³/rev (125,63 cm³/rev) available in groups 30 and 35
Max. peak pressure up to 4640 psi (320 bar)

Modular design
Accurate division of flow
High flow
Combinations between different groups

PRESSURE COMPENSATED FLOW DIVIDERS

They are designed for applications where two separate hydraulic circuits are to be served from a single pump. The valve splits the flow in three ratios between the two hydraulic lines. Flow through the series PD flow divider cannot be reversed but can be combined in the reverse direction and synchronized in both directions. Series PD and PDC flow dividers will divide the inlet flow to ±10% of the specified outlet flow when used within recommended capacities.

Features

Pressure compensated
Cross drilled spool provides accurate metering
High tensile, cast iron body

ROTARY GEAR FLOW DIVIDERS

These hydraulic flow dividers provide many useful functions from a single pump source:-

» Synchronised operation of multiple cylinders or fluid motors.
» Proportional division of pump output among several circuits.
» Intensified pressure when pressure higher than pump capacity is needed.
» Displacements 0.232 to 0.813 cu. in. (3.8 to 13.32 cc)
» Maximum Pressure 4,500 psi (310 Bar)
» Maximum input Flow Per Section 14 gpm (53 lpm)

 
 
     
         

 

 Gear flow dividers
  POLARIS [PLD]
  MAGNUM [HDD]
  Hydraulic flow dividers
 
 Applications
  Flow dividers applications

 

 

 

 
 
 

CALL US

 
Our warehouse has thousands of items ready for delivery. Contact us for a free offer.

 

SEND US AN E-MAIL

 
 

COMPANY BROCHURE

 

BRANDS

 
 

TRANSLATE

 

 

FOLLOW US

 
  Seguici su Twitter   Seguici su Google +   Seguici su Youtube
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Thanks to the know-how and partnerships with global leaders suppliers of hydraulic components, our organization is able to offer customers the best solutions.

Our technical department is available to suggest the best solutions for every need.
Besides standard products supply, D&D Ricambi Srl provides custom solutions for small quantitatives.
 
SP 231 Km 80,176 - 70026 Modugno (Ba)
Fax +39 080.5352723  e-mail:info@dedricambi.it

 

 

D&D Ricambi Srl - P.IVA 04306560725 - worldwide - hydraulic components uk - hydraulikkomponenten deutschland - ru - ch - tr - created by www.omnilink.it